LG IPECS - Page 289

IPECS Release 5
Feature Description & Operation 5.0
6-20
Operation
System Attendant
To Change LCD Date Format (toggle)
1. Press the [
PGM] button.
2. Dial ‘042’, the Date Display Format program code.
To Change LCD Time Format (toggle)
1. Press the [
PGM] button.
2. Dial ‘043’, the Time Display Format program code.
Conditions
Programming
S
YSTEM 1. System Attendant (PGM 164-Btn 1)
2. LCD Date Display Mode (PGM 169-Btn 1)
3. LCD Time Display Mode (PGM 169-Btn 2)
Related Features
Attendant Positions
Hardware
6.19 SYSTEM CLOCK SET
Description
The System Attendant can set the system Time/Date.
Operation
System Attendant
To set the system clock
1. Press the [
PGM] button.
2. Dial ‘041’, the Attendant Station Program code.
3. Dial six (6) digits for the Date (MM/DD/YY) or [
SAVE] to skip the Date.
4. Dial four (4) digits for the Time (HH/MM) or [
SAVE] to skip the Time setup.
5. Press the [
SAVE] button, confirmation tone is heard and Attendant station returns to idle
status.
To set the system clock through ISDN message
1. Press the [
PGM] button.
2. Dial ‘046’, the Attendant Station Program code.
3. Dial ‘1’ to set DATE/TIME using ISDN message.
4. Press the [
SAVE] button, confirmation tone is heard and Attendant station returns to idle
status.