LG IPECS - Private Line

IPECS Release 5
Feature Description & Operation 5.0
4-20
Conditions
1. The ISDN must support the Malicious Caller Id Supplementary Service as defined by the
EN300-130 standard protocol.
2. If the MCID request is successful, the SMDR call record will include the CLID returned from
the ISDN and the characters “MT”. If the request fails, the characters “MF” are included in
the record.
3. If the system is programmed to save SMDR records, the MCID is stored in the system
memory as part of the call record.
Programming
CO/IP 1. MCID Request Code (PGM 109-Btn 1)
S
YSTEM 1. SMDR Save (PGM 177-Btn 1)
Related Features
ISDN Supplementary Services
Hardware
ISDN line
iPECS Phone
4.17 PRIVATE LINE
Description
One or more iPECS Phone users can be assigned exclusive use of a CO line or lines. These
“Private” lines are assigned to CO line Group 00 by the iPECS system and an appearance {
CO}
button must be assigned at the user’s iPECS Phone.
Operation
iPECS Phone
To place an outgoing Private line call
1. Press the {
CO} button assigned as the Private line, dial tone is received from the CO line.
2. Dial the desired number.
To answer an incoming Private line call
1. Press the flashing {
CO} button.
Conditions
1. Private lines will not recall to the Attendant station.
2. Private lines are not subject to Call Pick-Up except by an assigned Secretary with an
appearance of the Private line.
3. When put on hold, a Private line will recall the user after the appropriate Hold timer. The user
will receive recall for the Hold Recall time, and, if still unanswered, the user will continue to