IPECS Release 5
Feature Description & Operation 5.0
2-123
5. Link-Paired Station does not receive call coverage ring on both the original and paired station,
since they have their own flexible button and call coverage feature is not implemented on same
station but different flexible buttons for same covered station.
Programming
STATION 1. Call Coverage Enable (PGM 111-Btn 12)
2. Call Coverage Ring (PGM 111-Btn 13)
Related Features
Hardware
2.66 STATION GROUPS
Description
Stations can be grouped for incoming call routing and Call Pick-up purposes. Ten types of groups
can be defined:
Circular
Terminal
ACD
Ring
Pick-Up
External Voice Mail
VMIM/VSF-Voice Mail
Feature Server UMS Group
Net VM (Centralized External VM)
Unified Communication Solution Server
Circular Station Group
In Circular Hunt, calls to a station in the group will go to the station, if unavailable or unanswered in
the hunt no answer time; the call will be directed to the next station defined in the group. The call will
continue to hunt until each station in the group has been tried. The call remains at the last station or
passes to a designated overflow station or group.
A Circular Station Group can be assigned with a pilot number (the Station Group Number) so that
calls to the pilot number will hunt. In this case, the call will be directed to the first station in the group
and, if needed, hunt through each station in the group until reaching the last station. The call may
remain at the last station, passed to an overflow destination or sent to a voice mailbox.
Terminal Station Group
Calls to a station in a Terminal Station Group that encounter an unavailable or unanswered status
will be routed through the hunt process. The call will proceed to the next listed station in the group
until reaching the last listed station in the group. The call may remain at the last station or be routed
to an Overflow destination.
To Next Page
Loading...
