IPECS Release 5
Feature Description & Operation 5.0
3-10
3.9.2 Short Message Service (SMS)
Description
The Short Message Service (SMS) provides the ability to send and receive text messages to and
from iPECS phones equipped with a display including the Phontage, UCS Client and WLAN Phone.
The text can comprise words, numbers, or an alphanumeric combination. Each short message
can be up to 100 characters in length when Latin alphabets are used.
Users send and receive messages from their iPECS Phone or the Station Program selection in the
iPECS system Web Home Page. For operation using the iPECS system Home Page see your
System Administrator.
Operation
To assign a Flex button as a {
SMS SEND} button;
[
PGM] + {FLEX} + [PGM] + ‘36’ + [SAVE]
To resend an existing SMS message;
1. Press the [
PGM] button.
2. Dial ‘36’, the SMS send code.
SMS SENDING MODE
RESEND-(1) EDIT-(2)
3. Dial ‘1’ to resend a message.
DIAL STA DEST(XXX-XXX)
SKIP-(*)
4. Dial the desired station range to receive the message or ‘*’ to use the displayed station range.
STA 100-124
SEND-(SAVE) CANCEL-(#)
5. Press the [
SAVE] button to send the message or “#” to cancel.
To send a new message
1. Press the [
PGM] button.
2. Dial ‘36’, the SMS send code.
SMS SENDING MODE
RESEND-(1) EDIT-(2)
3. Dial ‘2’ to send a new message.
DIAL STA DEST(XXX-XXX)
4. Dial the desired station range to receive the message
STA 100-124
SEND-(SAVE) CANCEL_(#)
To Next Page
Loading...
