LG IPECS - Flexible Numbering Plan; Headset Compatibility

IPECS Release 5
Feature Description & Operation 5.0
2-84
SMDI (Simplified Msg Desk Interface)
Two-Way Record
VMIM/VSF Integrated Auto Attd/Voice Mail
Hardware
2.39 FLEXIBLE NUMBERING PLAN
Description
User access to the iPECS system resources and features is accomplished through feature codes or
iPECS Phone buttons. The Administrator selects from one of the eight (8) different standard
numbering plans and, if desired, assigns codes for individual functions in the Flexible Numbering
Plan. The feature codes are defined in the system’s Flexible Numbering Plan; refer to Appendix B of
the iPECS Admin and Programming Manual.
Operation
System
System implements feature activation based on the Flexible Numbering Plan.
Conditions
1. Feature codes can be one to three digits in length.
2. During programming, conflicts in the Numbering Plan are not allowed. The existing non-
conflicting Numbering Plan is used until correctly updated.
Programming
SYSTEM ID 1. System Id (PGM 100-Btn 4)
N
UMBERING 1. Flexible Station Numbering Plan (PGM 105)
2. Flexible Numbering Plan (PGM 106 – 109)
Related Features
Hardware
2.40 HEADSET COMPATIBILITY
Description
An industry standard headset can be connected to an iPECS Phone in place of or in addition to the
handset. The station is then programmed for Headset operation.
In the Headset mode, pressing the [SPEAKER] button will send audio to the Headset instead of the
speakerphone. In addition, when in the Headset mode, ring signals can be delivered to the speaker
or the headset as defined in the system database.