IPECS Release 5
Feature Description & Operation 5.0
6-12
Related Features
System Clock Set
CO/IP Ring Assignment
LBC (Loud Bell Control)
Dialing Restrictions
Auto Service Mode Control
System Call Routing
Hardware
6.11 DSS CONSOLES
Description
The system allows an unlimited number of DSS/LS Consoles to be installed in the system. Up to 1
DSS/DLS consoles may be associated with a station connected to an iPECS-Micro, and up to 3
DSS/DLS consoles may be associated with a station connected to an iPECS-50 or 100 and up to 9
may be associated with a station for all other system configurations. Each button on the console
can be assigned as CO/IP line, DSS, or feature button.
For ease of programming, each console is assigned to a button ‘map’ in the system database. The
user or Administrator may then change individual Flex buttons as desired. Operation of the
DSS/BLF Console Flex buttons is the same as Flex buttons on the iPECS Phone.
Operation
Conditions
1. Each DSS/DLS Console is assigned to operate in connection with a specific station.
2. There is no limit to the number of DSS/DLS units in a system beyond the basic system
capacities.
3. Assignments for the DSS/DLS button maps are detailed in the iPECS Admin & Programming
manual. Note that the individual button assignments can be changed as with the iPECS
Phone Flex buttons.
To Next Page
Loading...
