LG IPECS - 6.5 ATTENDANT STATION PROGRAM CODES

IPECS Release 5
Feature Description & Operation 5.0
6-4
Programming
S
YSTEM 1. Attendant Recall Timer (PGM 180-Btn 1)
2. Hold Recall Timer (PGM 180-Btn 5)
Related Features
Hold
Call Transfer
Hardware
6.5 ATTENDANT STATION PROGRAM CODES
Description
Using the Attendant Station Program Codes, the Attendant can print SMDR and Traffic reports on-
demand, assign Authorization Codes, control certain user features, record VMIM/VSF
announcements, enable/disable Auto Service Mode Control, etc. Items are available using the
Program Code directly or scrolling the multi-level display menu. The following indicates the menu
displays, including the digit for selecting the item, the item description and further required entries.
The various levels of the display menu are indicated by indentation. For additional information,
reference Appendix C of the iPECS Admin & Programming Manual. Note also, some Program
Codes are only available to the System Attendant or stations allowed access to the Attendant
Program code ‘0’.
[1] PRINT
[1] SMDR
[1] PRINT SMDR STA BASE
station range input
[2] DELETE STATION BASE
station range input
[3] DISPLY CALL CHARGE
[4] ABORT PRINTING
[5] PRINT LOST CALL
[6] DELETE LOST CALL
[2] TRAFFIC - System attendant only
[1] PRINT ALL SUMMARY
enter Analysis time & type
[2] PRINT ALL PERIDICLLY
enter Analysis time, type & Print time
[3] ABORT PERIDIC PRINTING
[4] PRINT ATD TRAFFIC
enter Analysis time & type
[5] PRINT CALL SUMMARY
[6] PRINT CALL HOUR