LG IPECS - CO;IP Line Preset Forward

IPECS Release 5
Feature Description & Operation 5.0
4-3
CO/IP 1. CO Line Group (PGM 141-Btn 1)
S
YSTEM 1. CO Line Choice (PGM 160-Btn 4)
Related Features
Hardware
4.4 CO/IP LINE PRESET FORWARD
Description
Each CO/IP Line can be assigned a Ring-No-Answer Preset Forward destination. An incoming
call on the CO/IP line will be routed to the defined ring destination. At expiration of the CO/IP Line
Preset No Answer Forward timer, the call is forward to the defined Preset Forward destination,
which is an index to the ICLID Ring Assignment Table.
The destination can be a station or station group including an adjunct Voice Mail. When the call is
forwarded to an adjunct Voice Mail group, a predefined Voice Mail Id (VMID) will be sent to the VM
system to identify the Mailbox to receive the call.
Operation
System
Operation of this feature is automatic.
Conditions
1. CO/IP line Preset Forward is disabled for calls initially routed to a station group.
2. CO/IP line Preset Forward will override Call Forward No-Answer at a station.
3. CO/IP line Preset Forward is disabled if the Preset Forward Timer is set to 0.
4. The CO/IP line Preset Forward destination cannot be the VMIM/VSF group.
Programming
CO/IP 1. CO Preset Forward, Forward timer (PGM 147-Btn 1)
2. CO Preset Forward, Ring Table Index (PGM 147-Btn 2)
3. CO Preset Forward, VMID (PGM 147-Btn 3)
ISDN
& ICLID 1. ICLID Ring Assignment Table (PGM 204)
Related Features
Call Forward
ICLID Call Routing
Hardware