IPECS Release 5
Feature Description & Operation 5.0
1-1
1. INTRODUCTION
1.1 MANUAL APPLICATION
This document provides detailed information covering description and operation of the numerous
features available in the iPECS Series Release 5 system software. The document is written
assuming the system employs the default-numbering plan for North America.
1.1.1 Organization
Features are arranged alphabetically in six different major groupings as follows:
x Section 2 System Features
x Section 3 Intercom Features
x Section 4 CO/IP
x Section 5 iPECS Phone
x Section 6 Attendant Position
x Section 7 SLT
1.1.2 Feature Information
Each section is an alphabetical listing of features with the description and operation of each. The
structure is divided into 6 parts as below:
x Description: explains the nature of the feature.
x Operation: gives detailed step-by-step operation of the feature for iEPCS IP Phones and
SLTs.
x Conditions: explains known feature interactions and constraints related to the feature.
x Programming: lists database entries that may be required for proper feature operation.
x Reference: lists related topical information to aid in understanding the feature.
x Hardware: lists hardware required for proper feature operation.
1.2 SYSTEM CAPACITIES
The iPECS Series is available in several configurations as listed in Table 1.2-1. Total port
capacities range from the 31-channel iPECS-Micro to iPECS-1200 at 1200 ports.
Table 1.2-1 System Capacity Chart
Capacity
Item
iPECS-
Micro
iPECS-50
iPECS-100
(MFIM100)
iPECS- 300
(MFIM300)
iPECS-600
(MFIM600)
iPECS-1200
(MFIM1200)
Main Cabinet n/a n/a 10 slots 10 slots 10 slots 10 slot
System Ports 31 ports 50 ports 100 ports 300 ports 600 ports 1200 ports
Stations*1 26 w/2 SLT
std.
50 w/2 SLT std. 70 300 600 1200