IPECS Release 5
Feature Description & Operation 5.0
3-6
Conditions
1. Intercom calls from a station to a denied access Intercom Tenancy Group will return error
tone.
2. Intercom Tenancy does not affect the Station Numbering Plan in the system. All stations in
the system must have different station numbers even if they are assigned to different
Intercom Tenancy groups.
3. The Attendant of an ICM Tenancy Group can be any station in the system and it is not
affected by ICM Tenancy Group access.
4. When the Attendant of an ICM Tenancy Group sets Day/Night/Weekend mode, it will affect
only the assigned ICM Tenancy Group.
5. Calls to and from CO/IP Lines are not affect by ICM Tenancy however; calls can not be
transferred between groups if access is not allowed between the groups.
6. Intercom Tenancy Group 00 is the default or unassigned group. Stations assigned to group
00 are unaffected by Intercom Tenancy and can place and receive calls with stations of all
other groups.
Programming
STATION 1. ICM Group Number (PGM 111-Btn 17)
2. ICM Tenancy Group (PGM 125)
T
ABLES 1. Flexible DID Table (PGM 231)
2. Auto Ring Mode (PGM 233)
Related Features
Intercom Call (ICM Call)
CO/IP Ring Assignment
Flexible Numbering Plan
Call Transfer
Auto Service Mode Control
Hardware
3.8 INTERCOM TRANSFER
Description
Users can transfer an active Intercom call to other stations in the iPECS system. Intercom calls
can be transferred after announcing the call (screened) or without announcing the call
(unscreened).
The Intercom station is placed on Exclusive Hold. The Transfer Recall Timer is initiated and, if this
timer expires before the Intercom call is answered, the call will recall the transferring station until
answered or abandoned.
Operation
iPECS Phone
To perform an Screened ICM transfer, while on an ICM call
1. Press [
TRANS] button.
To Next Page
Loading...
