IPECS Release 5
Feature Description & Operation 5.0
3-7
2. Dial the station to receive call.
3. At answer or Splash tone, announce call.
4. Hang-up, return to idle.
Or,
1. Press {
DSS/BLF} button for the desired station.
2. At answer or Splash tone, announce call.
3. Hang-up, return to idle.
While on a Intercom call, Unscreened call transfer
1. Press [
TRANS] button.
2. Dial Station to receive call.
3. Hang-up, return to idle.
Or,
1. Press {
DSS/BLF} button for the desired station.
2. Hang-up, return to idle.
SLT
To perform a Screened transfer of an active Intercom call
1. Momentarily depress the Hook-switch.
2. Dial Station to receive call.
3. At answer or Splash tone, announce call.
4. Hang-up, return to idle.
While on an Intercom call, Unscreened call transfer
1. Momentarily depress the Hook-switch.
2. Dial Station to receive call.
3. Hang-up, return to idle.
Conditions
1. The [ICM] button provides an appearance for the transferred station. The LED indicates
status and pressing the button connects to the station.
2. If the receiving station is busy, the transferring station may camp the call on to the busy
station, see Camp-On.
3. A station in DND or out-of-service cannot receive a transfer, and such attempts will result in
error tone.
Programming
Related Features
Exclusive Hold
Hold Recall
Call Waiting/Camp-On
DND (Do Not Disturb)
Call Transfer
Hardware
To Next Page
Loading...
