EasyManua.ls Logo

LG IPECS - Mobile Extension

LG IPECS
294 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
IPECS Release 5
Feature Description & Operation 5.0
2-101
2.53 MOBILE EXTENSION
Description
A mobile phone may be registered to a station allowing the mobile phone to place and receive calls
through the system. ISDN DID calls are sent to the user’s iPECS Phone and the active registered
mobile phone simultaneously. If the mobile phone is paired with a Hunt group station, Hunt group
calls routed to the station also ring to the active mobile phone when enabled.
The mobile phone users can access the facilities of the iPECS to place internal and external calls as
well as activate/access features. To access system facilities and resources, the mobile user calls the
DID number of the corresponding iPECS Phone. When the call is received, the system matches the
CLI to the mobile phone and provides the mobile user with system dial tone.
The user may be allowed to register and activate a mobile phone.
Operation
iPECS Phone
To register a the mobile phone number;
1. Press the [
PGM] button,
2. Dial ‘37’.
3. Dial the mobile phone number.
4. Press the [
SAVE] button.
To activate a registered mobile phone from the user’s station:
1. Press the [
PGM] button.
2. Dial ‘38’.
3. Dial digit ‘1’ to activate, ‘0’ to deactivate.
4. Press the [
SAVE] button.
To place a call from the mobile extension using the iPECS:
1. Dial the DID number of the station, the system will check the CLID, answer the call and the
user will receive intercom dial tone.
2. Place internal or external iPECS call as normal.
To Transfer a call from the mobile extension using the iPECS:
1. Dial ‘*’ while on an iPECS call.
2. Dial the desired extension, the call is transferred and the mobile phone returns to idle.
Note: the mobile may reconnect by dialing ‘#’.
System
Incoming DID calls are sent to active mobile phones automatically.
Conditions
1. When the mobile phone places an external call through iPECS, the CLI of the corresponding
station is used.
2. The Mobile Extension features are supported via system digital (T1 and ISDN) lines only.
3. Message Wait and Callback cannot be activated to a mobile phone.

Table of Contents

Related product manuals