IPECS Release 5
Feature Description & Operation 5.0
2-46
Related Features
Intercom Signaling Mode
Ringing Line Preference
Directed Call Pick-Up
Pick Up Group
Private Line
Hardware
2.16 AUTO CALL RECORDING
Description
iPECS Phone users can be configured in the system to record all calls to a mailbox or the hard disk
drive of an iPECS Phontage or UCS Client. When recorded to a mailbox, users manage the
recording through voice mail. For recordings to the Phontage or UCS Client, recordings are
managed directly by Phontage or UCS Client with the ability to listen to, delete or send the recording
to others via e-mail.
Operation
Recording of calls is automatic when assigned.
To manage the recordings, use the procedures outlined in the Phontage or UCS Client User Guide.
Conditions
1. The Phontage or UCS Client can record one call at a time and must be idle. While recording, if
the Phontage or UCS Client places or receives a call, recording terminates.
2. When call recording begins, the station will receive a Call Recording confirmation tone.
3. A remote Phontage or UCS Client will not support call recording.
Programming
STATION 1. Two-way Record Privilege (PGM 112-Btn11)
2. Auto Call Recording (PGM 112-Btn 20)
3. Call Recording Destination (PGM 112-Btn 21)
Related Features
Hardware
iPECS Phone, PC with Phontage or UCS Client
To Next Page
Loading...
