IPECS Release 5
Feature Description & Operation 5.0
4-2
Conditions
1. Stations may Flash on a CO Line defined for PABX operation and will experience COS
dialing restrictions if a PABX Trunk access code is dialed.
2. During a Flash, the LED for the CO line button will remain lit.
3. A Flash may be stored as a part of a Station or System Speed Dial number.
4. While connected to an internal call or dial tone, pressing the [
FLASH] button will regain ICM
dial tone.
5. While making a Page Announcement (internal or external, including all call paging), pressing
the [
FLASH] button will terminate the Page Announcement and return ICM dial tone.
6. The Flash function is not available on VoIP calls.
Programming
CO/IP 1. Flash Type (PGM 141-Btn 6)
2. CO Flash Timer (PGM 142-Btn 12)
Related Features
Station Speed Dial
System Speed Dial
Hardware
4.3 CO/IP LINE GROUPS
Description
The CO/IP lines in the system can be placed together into groups for assigning access by stations
and common access dial codes. There are 20 groups in the iPECS-Micro & 50 & 100 , 72 groups
available in the iPECS 300 & 600 and 200 grouups available in the iPECS 1200. Unused CO lines
are assigned to CO/IP Group 21 in the iPECS-Micro & 50 & 100 , 73 in the iPECS 300 & 600 and
201 in the iPECS 1200. Private Lines are assigned to CO/IP Group 00.
Operation
Conditions
1. Unused CO/IP lines should be assigned to the appropriate group so that stations cannot
access these lines.
2. CO/IP lines in Groups 01 through 72(200) can be accessed individually by dialing the code
‘88’ and the CO/IP line number.
3. Only {CO}/{IP} line buttons can access the CO/IP lines assigned to group 00, Private Lines.
4. The system will select a CO/IP line from a group based on the Round Robin or Last Choice
determined by database assignments.
Programming
STATION 1. CO PGM (PGM 112-Btn 6)
To Next Page
Loading...
