LG IPECS - ISDN Supplementary Services; ISDN Call Deflection; ISDN Malicious Call ID Request

IPECS Release 5
Feature Description & Operation 5.0
4-19
Operation
iPECS Phone
To activate ISDN Call Deflection to an external number
1. Lift the handset or press the [
SPEAKER] button to receive dial tone.
2. Press the [
FWD] button.
3. Dial Forward condition (‘1’~’4’, ‘#’)
4. Press [
SPEED] button and desired bin number.
5. Replace the handset, return to idle.
To deactivate ISDN Call Deflection
1. Press flashing [
FWD] button, Call Forward will deactivate and the [FWD] button LED is off.
Conditions
1. The ISDN must support the Call Deflection Supplementary Service as defined by the
ETS300-202/206/207 standard protocol.
2. ISDN lines that support Call Deflection must be assigned in the system database, PGM 143,
Btn 7.
Programming
CO/IP 1. ISDN-SS CD (PGM 143-Btn 7)
Related Features
ISDN Supplementary Services
Hardware
ISDN line
iPECS Phone
4.16.2 ISDN Malicious Call Id Request
Description
When the ISDN supports the Malicious Caller Id supplementary service, iPECS can request the
CLID from the ISDN. The CLID is saved and output in the SMDR call record. Malicious Caller Id
is activated during an ISDN call and requires a {
MCID REQUEST} Flex button to access the feature.
Operation
iPECS Phone
To program an {
MCID REQUEST} button;
[
PGM] + {FLEX} + ‘*0’ + [SAVE]
To request MCID, while on an incoming ISDN call
1. Press the {
MCID REQUEST} button.