LG IPECS - Two-Way Record; Voice over

IPECS Release 5
Feature Description & Operation 5.0
5-29
1. Hang-up, return to idle.
To manage the recordings, use the procedures outlined in the Phontage or UCS Client User Guide.
Conditions
1. The {
RECORD} button LED will flash at 240 ipm while recording.
2. This feature is available when using the VMIM/VSF VM, the Feature Server or using an
external AA/VM, which employs the SMDI communications mode. When an external AA/VM
system employs the in-band (DTMF) mode, Two-Way Record is not available.
3. With the Feature Server or VMIM, internal calls can be recorded as well as external calls.
4. Use of this feature when the Two-Way Recording Warn Tone is disabled may be interpreted
as a violation of federal, state, or local laws, and an invasion of privacy. Check applicable
laws in your area before recording calls using this feature.
5. If a destination for the recording is not defined for the {
RECORD} button, the Call Record
Destination defined in PGM 112 is employed.
Programming
S
TATION 1. Two-way Record Privilege: ON (PGM 112-Btn 11)
3. Call Record Destination (PGM 112-Btn 21)
2. Auto Call Record (PGM 112-Btn 20)
S
YSTEM 1. Two-way Record Warning Tone (PGM 161-Btn 19)
Related Features
External Auto Attendant/Voice Mail
VMIM/VSF Integrated Auto Attd/Voice Mail
Conference
Conference Group
Multi-Party Voice Conference
Conference Room
Auto Call Recording
Hardware
iPECS Phone
VSF, VMIM, Feature Server or External SMDI based AA/VM system
Phontage or UCS Client
5.27 VOICE OVER
Description
This feature allows users of iPECS Phones, off-hook on a call (CO, IP or Intercom), to receive a
voice announcement through the handset receiver with the existing call. The Voice Over is muted
so as not to interfere with the existing conversation. The called station user may then respond to
the calling party using Camp-On response or may use Silent Text Messaging to respond.