IPECS Release 5
Feature Description & Operation 5.0
5-28
4. Press the [SAVE] button.
To activate a Station User Program Code feature or function
1. Press the [
PGM] button, the Station User Program Menu is displayed.
2. If desired, use the [
VOL UP]/[VOL DOWN] to display the desired menu item. or dial the desired
Station User Program Code and additional inputs as required
Programming
Conditions
Related Features
Station Flexible Buttons
Temporary Station COS/Lock
Walking COS
Station Message Wait/Call Back
CLI Message Wait
Wake-Up Alarm
Pre-defined & Custom Text Display Messages
Headset Compatibility
Attendant Station Program Codes
Hardware
iPECS Phone w/Display
5.26 TWO-WAY RECORD
Description
An iPECS Phone user can record any active conversation to the station user’s mailbox or to hard
disk drive of an iPECS Phontage or UCS Client. All calls including incoming, outgoing, internal,
external, conference, conference rooms and conference group calls can be recorded. A {
RECORD}
button must be assigned to access this feature.
Operation
iPECS Phone
To assign a flexible button as a {
RECORD} button
[
PGM] + {FLEX} + [PGM] + 80 + recording destination (optional) + [SAVE]
To activate Two-Way Record while on a CO/IP call
1. Press the {
RECORD} button, record warning tone heard, and recording starts.
To stop Two-Way Record while on an CO/IP call
1. Press the {
RECORD} again.
Or,
To Next Page
Loading...
