IPECS Release 5
Feature Description & Operation 5.0
5-27
[3] ACTIVE CONF-ROOM
[4] DEACTIVE CONF-ROOM
[5] MONITOR CONF_GROUP
[1] SET PRE:CUST MSG
Under selection [6] HEADSET select 1~2 as below
[1] HEADSET OR SPK MODE
[2] HEADSET RING MODE
Next top-level Menu selection
[7] SUPPLEMENTARY
[*] SYSTEM
Under selection [7] SUPPLEMENTARY, select 0~9 as below
[1] LCD DISPLAY LANGUAGE
[2] MFIM/E VERSION
[3] BGM
[4] REGISTER STA NAME
[5] DISP PHONE IP ADDR
[6] CHANGE PHONE IP ADDR
[7] DISP MAC ADDR
[8] CHANGE MODE
[9] STA MSG WAIT RETR
[*] DISP ADD-ON PACKAGE
Under selection [*] SYSTEM, access Admin
[#] ENTER ADMIN
[7] FORCED FWD TO DEST
[8] REGISTER BLUETOOTH
[9] BLUETOOTH USAGE
[0] HOTDESK LOGIN
[*] HOTDESK LOGOUT
Operation
iPECS Phone
To assign a Station User Program Code to a Flex button
1. Press the [
PGM] button, the Station User Program Menu is displayed.
2. Press the desired Flex button.
3. Dial the desired Station User Program Code and additional inputs that may be required.
To Next Page
Loading...
