IPECS Release 5
Feature Description & Operation 5.0
2-96
4. If there are no available channels when trans-coding is required, the VOIM gateway will release
call control.
Programming
Related Features
System Networking
Remote Device Zone Management
Hardware
VOIM8 or VOIM24
2.49 LNR (LAST NUMBER REDIAL)
Description
The last number dialed is stored (up to 48 digits) in the station’s Last Number Redial buffer. The
user may request the system redial the last dialed number without the need to dial the number.
For iPECS Phones with displays, the last 10 numbers are stored in the LNR buffer. The user may
view the numbers using the [
VOL UP]/[VOL DOWN] button and select the number to dial from the list.
Operation
iPECS Phone
To use Last Number Redial using the [Redial] button;
1. Lift the handset or press the [
SPEAKER] button.
2. Press the [
REDIAL] button.
3. Press the [
VOL UP]/[VOL DOWN] button to highlight the desired number.
4. Press [
SAVE] or [REDIAL] to dial the number highlighted.
To use Last Number Redial using the LIP-8000 series soft buttons
1. Press the [
DIR] soft button.
2. Press the [
SPEED] soft button.
3. Dial ‘*’.
4. Use the Navigation button to select the desired number.
5. Press the [
HOLD/SAVE] button to place the call.
SLT
To use Last Number Redial
1. Lift the handset.
2. Dial ‘552’, the Last Number Redial code.
Conditions
1. For iPECS Phones with display, the redial buffer will store duplicate numbers unless dialed
consecutively.
To Next Page
Loading...
