LG IPECS - Station Call Coverage

IPECS Release 5
Feature Description & Operation 5.0
2-122
2.65 STATION CALL COVERAGE
Description
The Call Coverage feature permits an iPECS Phone user to receive ring and answer calls directed to
a covered station. This feature is generally employed to allow a Secretarial answering position to
cover calls to other stations. When a covered station rings, the {
CALL COVERAGE} button LED will
flash and the covering station may receive ring (immediate or delayed) for the call. The covering
station can answer the call using the {
CALL COVERAGE} button, terminating ring at other stations.
Once answered, the LED of {
CALL COVERAGE} buttons for the station at other covering stations will
extinguish.
Operation of this feature requires a {
CALL COVERAGE} button at the covering iPECS Phone and the
covered station must activate call coverage. A station can have multiple Call Coverage buttons each
covering a different station and multiple stations can have a Call Coverage button for a given station.
Operation
iPECS Phone
To assign a {
CALL COVERAGE} button at the covering station
[
PGM] + {FLEX} + ‘67’ + covered Station number + [SAVE]
To activate Call Coverage at the covered station
1. Press the [
PGM] button
2. Dial ‘141’, the Call Coverage code.
3. Dial ‘1’ to enable or ‘0’ to disable Call Coverage.
To assign ring for a {
CALL COVERAGE} button
1. Press the [
PGM] button
2. Dial ‘142’, the Call Coverage Ring code.
3. Dial the delay in ring cycles (‘0’-‘9’).
When a covered station receives a call, the covering station will receive the following display:
CALL FOR STA xxxx
FROM yyyy time
Conditions
1. An iPECS Phone user may cover for an SLT or other stations. However, since a Flex button is
required, an SLT cannot provide coverage for other stations.
2. When off-hook or in DND, the covering station will only receive a visual indication of the call
from the LED of the {
CALL COVERAGE} button and display, no off-hook ring is provided.
3. The {
CALL COVERAGE} button will provide an appearance for CO/IP lines that do not appear on
the covering station except for Private Lines. To cover for Private Lines, the covering station
must have an appearance and be allowed access to the Private Line.
4. Call Coverage attributes can be assigned either by the covered station user or in the system
database.