IPECS Release 5
Feature Description & Operation 5.0
2-176
2.76 ZONE CALL AND CONNECTION NUMBER LIMIT
2.76.1 Zone Outgoing CO call Number Limit
Description
Every system has the limited CO lines and all devices are sharing to use CO lines. The number of
CO lines may be smaller than the number of other devices. If some devices use all the CO lines, the
other devices can’t call to outside of system. To prevent this situation and to increase the common
usage of the CO lines, outgoing CO calls are limited to zone maximum outgoing CO call number.
Zone maximum outgoing CO call number can be set from 0 to maximum CO line capacity. The
default value of zone maximum outgoing CO call number is 0 and it means there is no limit to zone
outgoing CO call.
Operation
Operation of this feature is automatic based on zone maximum outgoing CO call number.
Conditions
1. If maximum outgoing CO call number is set to 0, zone outgoing CO call will not be limited.
2. If maximum outgoing CO call number is set to non-zero value and current zone outgoing CO
call number is more than maximum value, the outgoing co call trying station will play error tone
and display “OUTGOING CALL LIMIT OVER” on the LCD.
3. Networking call is also processed as an outgoing CO call.
4. System counts emergency call in current outgoing CO call number, but no limit procedure is
applied.
Programming
ZONE DATA Zone Attributes (PGM 439-Web only)
Related Features
Hardware
To Next Page
Loading...
