IPECS Release 5
Feature Description & Operation 5.0
2-175
2.75 REMOTE DEVICE ZONE MANAGEMENT
Description
Remote devices, in particular those not reachable by the system, are managed by grouping devices
by various characteristics in a Zone. Placing devices into Zones simplifies management allowing
definition of common characteristics to the devices within the zone. Zone attributes include:
x Nation code
x Language
x Page area
x Time-zone, GMT or system
x Holiday ring modes
x RTP relay
x RTP Relay group.
Operation
Zone operation is automatic once configured.
Conditions
1. Zone attributes which may affect ringing, such as Holiday and Vacation settings, have lower
priority than other ring assignments such as Tenancy group ring mode established for DID lines.
2. Zone Attributes do not provide adjustment of time for DST.
3. It is recommended to assign CO/IP lines and stations of a Tenant group in the same Device
Zone.
4. Wake-up time is based on the time displayed in the station’s LCD.
Programming
ZONE DATA Device Zone Number (PGM436-Web only)
Device Zone Attributes (PGM 437-Web Only)
Zone Access & Page Relay (PGM 438-Web only)
Zone Attributes (PGM 439-Web only)
Zone RTP Relay Group (PGM 440-Web only)
Inter-zone Attributes (PGM 441-Web only)
Zone Holiday Assignment (PGM 444)
Related features
Centralized Control TNET
Hardware
To Next Page
Loading...
