IPECS Release 5
Feature Description & Operation 5.0
2-51
1. The user may only Camp-On to a station in the busy mode. A user may not Camp-On to a
station in DND, in a conference, receiving a Page, etc.
2. The Camp-On procedure is employed by an Attendant or Secretary of an Executive/Secretary
pair to activate DND Override.
3. A Camp-On tone is sent each time the calling user presses the ‘*’ button.
4. A text or voice message, Pre-defined or Custom may be used to respond to a Camp-On.
Programming
Related Features
Pre-defined & Custom Text Display Messages
DND (Do Not Disturb)
Intercom Call (ICM Call)
Silent Text Message
Voice Over
Hardware
2.19 CO/IP ACCESS
Description
Stations can access outgoing CO/IP lines based on CO/IP Group Access programming. iPECS
Phones may use flexible buttons assigned to access a specific {
CO} line, {POOL} button for outgoing
calls or a {
LOOP} button.
Individual users may be allowed to assign CO/IP access flexible buttons.
Operation
iPECS Phone
To assign a {
LOOP} button
[
PGM] + {FLEX} + [PGM] + ‘85’ + [SAVE]
To assign a {
POOL} button
[
PGM] + {FLEX} + ‘8x’ + [SAVE]
To place an outgoing CO/IP call
1. Lift the handset or press the [
SPEAKER] button.
2. Press desired {
CO} line, {POOL}, {LOOP} button or dial the CO line or Group access code.
To answer an incoming CO/IP call
1. Lift the handset or press the [
SPEAKER] button.
Or,
1. Press flashing {
CO} line, {POOL} or {LOOP} button; lift the handset to speak privately
To Next Page
Loading...
