IPECS Release 5
Feature Description & Operation 5.0
2-52
SLT
To place an outgoing CO/IP call
1. Lift handset.
2. Dial the CO line or Group access code.
3. Dial the desired number.
To answer an incoming CO/IP call
1. Lift handset.
Conditions
1. When a user dials ‘9’, the system will search the preferred CO group for idle CO/IP line, if there
is no idle CO/IP line then the system will search the 1
st
CO/IP Group for an idle CO/IP line. The
system may continue the search through all CO/IP line groups for an available line if “1
st
CO/IP
Group Override” is enabled.
2. A telephone user not allowed access to a CO/IP line receives error tone when access is
attempted. The station may receive transferred calls on such denied access lines but will not
be able to flash or use the CO/IP line for an outgoing call.
3. A station denied access to a CO/IP line but assigned to have ring for the CO/IP line will receive
ring, a flashing {CO}/{IP} line LED and may answer the call. The user may transfer the call but
cannot make an outgoing call on the CO/IP line.
4. CO/IP lines placed on hold may be retrieved by dialing the “retrieve held CO/IP code ‘8#’ and
the CO/IP line number.
5. The Tx path to a station will be muted until the system has verified the Toll Restriction for the
CO/IP line.
6. When a CO line is seized, the system will monitor the line for dial tone.
7. The system selects lines from a group using the Round robin or Last-choice method based on
Admin Programming.
8. When an iPECS Phone is not assigned Ringing Line Preference, the user must press the
ringing {CO}/{IP} line button to answer the call.
9. iPECS Phone users may be assigned exclusive use of a CO line as a Private Line.
Programming
STATION 1. CO/IP Line Access (PGM 112-Btn 4)
2. CO Line Programming (PGM112-Btn 6)
3. Prefer CO/GROUP (PGM112-Btn 14th)
4. CO Line Group Access (PGM 117)
CO/IP 1. CO/IP Line Group (PGM 141-Btn 1)
2. CO/IP Ring Assignment (PGM 144)
Related Features
CO/IP Line Groups
CO/IP Ring Assignment
Ringing Line Preference
Private Line
Hardware