LG IPECS - 2. SYSTEM; 2.1 ACCOUNT CODE

IPECS Release 5
Feature Description & Operation 5.0
2-1
2. SYSTEM
2.1 ACCOUNT CODE
Description
Station users may allow tracking of specific calls by entering a non-verified variable length (up to 12
digits) identifier for a call. The identifier or “Account Code” is output as part of the Station Message
Detail Record (SMDR) for the call.
Operation
iPECS Phone
To assign a Flex button for {
ACCOUNT CODE} operation:
{
ACCOUNT CODE} button:
[
PGM] + {FLEX} + [PGM] + ‘84’ + [SAVE]
{
ONE-TOUCH ACCOUNT CODE} button:
[
PGM] + {FLEX} + [PGM] + ‘84’ + Account code (up to 12 digits) + [SAVE]
To enter an Account Code using an {
ACCOUNT CODE} button prior to placing a call:
1. Lift the handset.
2. Press the {
ACCOUNT CODE} button.
3. Dial the Account Code (1 to 12 digits).
4. Press ‘*’, Intercom dial tone is heard.
5. Place the CO/IP call as normal.
Or,
1. Lift the handset or press the [
SPEAKER] button.
2. Press the {
ONE-TOUCH ACCOUNT CODE} button.
3. Place the CO/IP call as normal.
To enter an Account Code using an {
ACCOUNT CODE} button during a call:
4. Press the {
ACCOUNT CODE} button.
5. Dial the Account Code (1 to 12 digits).
6. Press ‘*’.
Or,
7. Press the {
ONE-TOUCH ACCOUNT CODE} button
SLT
To enter an Account Code prior to placing a call:
8. Lift the handset.
9. Dial Flex Numbering Plan code ‘550’.
10. Dial the Account Code (1 to 12 digits).
11. Press ‘*’.
12. Place the CO/IP call as normal.
To enter an Account Code during a call:
1. Momentarily press the Hook-switch.
2. Dial Flex Numbering Plan code ‘550’.