IPECS Release 5
Feature Description & Operation 5.0
2-44
2.15.2 Group Call Pick-Up
Description
A station can answer (“Pick-Up”) incoming and transferred intercom, CO and IP calls ringing at
another station in the same station group. All ringing calls, except Private Line and Queue Callbacks,
are subject to Pick-up by other stations in the same group.
iPECS phone users may assign a Flex button as a {
GROUP CALL PICK-UP} button.
Operation
iPECS Phone
To assign a {
GROUP CALL PICK-UP} button
[
PGM] + {FLEX} + ‘566’ + [SAVE]
To Pick-up a call ringing at another station
1. Lift the handset or press [
SPEAKER].
2. Dial ‘566’, the Group Call Pick-up feature code.
Or,
1. Press the {
GROUP CALL PICK-UP} button.
SLT
To Pick-up a call ringing at another station
1. Lift the handset
2. Dial ‘566’, the Group Call Pick-up code.
Conditions
1. To pick-up a CO/IP call, the station must have an idle appearance button available.
2. When several calls are ringing simultaneously, Call Pick-up will connect the oldest highest
priority call (Ringing Line Preference, PGM 173).
3. Queue callback and Private Line calls are not subject to Call Pick-up and such attempts receive
error tone.
4. Handsfree announced intercom calls cannot be picked up by another station. Only ringing
intercom calls are subject to Call Pick-up.
5. When a station belongs to multiple groups, calls to the group with the lowest number are
answered first.
Programming
STATION GROUPS 1. Station Group (PGM 190-Btn 1)
S
YSTEM 1. Ringing Line Preference Priority (PGM 173)
Related Features
Intercom Signaling Mode
Ringing Line Preference
Directed Call Pick-Up
Station Groups
Private Line
Hardware
To Next Page
Loading...
