IPECS Release 5
Feature Description & Operation 5.0
2-62
To add a non-member to the Group:
1. Press the [
HOLD] button to place the conference on hold.
2. Call the desired party.
3. Press the [
CONF] button.
Conditions
1. The conditions associated with Multi-Party Voice Conference apply.
2. Members using the iPECS Phontage or UCS client may view the state of other members in the
conference.
3. The number of available groups is given in Table 1.2-1 System Capacity Chart. Each group
can have up to 32 members including the supervisor.
4. The user must have access to the Station Web Admin with the proper password (Authentication
code).
5. If there are insufficient MCIM channels available when initiating the conference group call, the
initiator receives error tone.
6. Two-way record can be used to record the Conference Group call.
Programming
Related features
Multi-Party Voice Conference
Conference Room
System Admin Programming
Hardware
MCIM
2.24 CUSTOMER SITE NAME
Description
A Customer Name, up to 23 characters, may be entered into the system database. The name is
displayed on the SMDR and database outputs as well as during an Admin session.
Operation
System
Operation of this feature is automatic when a name is assigned
Conditions
Programming
SYSTEM ID 1. Customer Site Name (PGM 100-Btn 2)
Related Features
Hardware
To Next Page
Loading...
