LG IPECS - Call Forward from VM; Outbound Message Notification

IPECS Release 5
Feature Description & Operation 5.0
2-169
2.72.3.8 Call Forward from VM
Description
External users can activate or deactivate Call Forward for their station. Pressing ‘7’ while retrieving
messages will return the "Mailbox Set Forward" prompt.
Operation
To activate Call Forward while in the VM;
1. Press ‘7’, for Mailbox set forward, the “Mailbox Set Forward” prompt is received.
2. Dial ‘1’ and receive the “Password Entry” prompt (“Please enter the number to forward to ...").
3. Dial Station Number as follows:
x To forward to another station, dial the station number.
x To forward calls Off net, dial ‘*’ and enter station speed number. If the station Speed bin is
valid, the confirmation announcement “forwarded to station ('xxx')” or “forwarded to speed bin
number (yyyy)” is played.
To deactivate Call Forward
1. Press ‘7’, for Mailbox set forward, the “Mail Box Set Forward” prompt is received.
2. Dial ‘2’ and receive the “Station forwarding is canceled” prompt.
To return to the Main menu
1. Dial ‘9’ and receive the “Mailbox Settings” prompt.
Conditions
1. If the user is external, the user must begin dialing within and dial subsequent digits within the
VSF Inter-Digit Timer. If not, the call is released.
2. This Mailbox Set Forward is only available for external users.
3. In Admin, VSF is used as the single reference for a parameter that applies to both the VSF and
the VMIM.
Programming
Related Features
Message Storage
Message Retrieval
Remote Message Retrieval
Message Retrieval Options
Hardware
VSF and/or VMIM
2.72.3.9 Outbound Message Notification
Description
The VSF and VMIM are able to dial an external number to notify a user of a new voice message. The
system employs the mobile extension number registered for the station receiving the message.
When a caller leaves a message with notification configured, the system places a call to the