IPECS Release 5
Feature Description & Operation 5.0
2-170
registered mobile extension. When the user answers, the extension prompt is played followed by the
new message prompt, (“You have xx new messages.”). The new message prompt indicates the
number of unheard messages.
The user must listen to the new message to confirm the notification. If the user takes no action
within the CCR Inter-digit timer or hangs-up, the call is disconnected and the system will retry the call
after the retry timer expires, until the user listens to the message or the number of attempts reaches
the retry counter. If the user does not answer, the ISDN or VoIP connection times out or disconnects
before answer, or is busy, the system disconnects the notification and will retry the call after the retry
timer. The system will retry the notification until the notification is successful or the number of call
attempts reaches the Retry count.
Operation
Operation of message notification is automatic when configured.
Condition
1. Outbound notification over a PSTN line is not available.
2. Caller Id will be the external caller who left the message or, for messages from another station,
Caller Id will be the station receiving the message.
3. If VSF/VMIM Notify is changed to ‘Not Use’, any existing notification will be terminated after the
initial notification call.
4. For proper operation, the Station COS and CO Group access for the station must be such as to
allow the notification call.
5. The destination of the notification is the Mobile telephone number assigned in PGM 236.
6. If all lines in the assigned CO group are busy when the system attempts to place the
notification call, the System will continuously try to seize CO line until a line is successfully
seized.
7. The Retry counter is incremented after the system access the CO line for notification.
8. The Retry count is from 1 to 9; the retry interval is from 1 to 3 minutes.
9. If a new message is logged before answer of the notification call, the message will be available
to the user and a new notification is not invoked. If a new message is received after answering
the notification call, the System will invoke another notification call. The user will receive the
notification after returning to idle.
Programming
TABLES 1. Tel Number (PGM 236-Btn 6)
2. VSF/VMIM Notify (PGM 236-Btn 7)
3. Notify Retry (PGM 236-Btn 8)
4. Retry Interval (PGM 236-Btn 9)
Related Features
Mobile Extension
Message Retrieval
Remote Message Retrieval
Message Retrieval Options
Hardware
VSF and/or VMIM
To Next Page
Loading...
