LG IPECS - Page 132

IPECS Release 5
Feature Description & Operation 5.0
2-117
8. If desired, enter a name, see alphanumeric entry chart below.
9. Press the [
SAVE] button.
SLT
To dial using a Station Speed Dial
1. Lift handset.
2. Dial ‘558’, the SLT Speed Dial access code.
3. Dial the desired bin number.
To program a Station Speed Dial number
1. Dial 561, the SLT Programming code.
2. Dial 558, the SLT Speed Dial access code.
3. Dial the Speed Dial bin number.
4. Dial the CO/IP line/group access code.
5. Dial the number to be stored.
6. Momentarily press the hook-switch.
7. If desired, enter a name, see alphanumeric entry chart below.
8. Momentarily press the hook-switch.
Alphanumeric characters may be entered to name the Speed Dial number using the chart below.
Q – 11
Z – 12
. – 13
1 – 10
A - 21
B - 22
C - 23
2 - 20
D - 31
E - 32
F - 33
3 - 30
G – 41
H - 42
I - 43
4 - 40
J - 51
K - 52
L - 53
5 - 50
M - 61
N - 62
O - 63
6 - 60
P - 71
R - 72
S - 73
Q - 7*
7 - 70
T - 81
U - 82
V - 83
8 - 80
W - 91
X - 92
Y - 93
Z - 9#
9 - 90
Blank - *1
: - *2
, - *3
0-00 #
Conditions
1. Accessing an empty Speed Dial bin will return error tone.
2. A Speed Dial number can use a specific CO/IP Line/Group entered by the user. If the assigned
line is busy, a line from the same group will be selected. If all lines in the group are busy, the
user may queue for the next available line.
3. All Speed Dial numbers are stored in memory protected from power loss.