LG IPECS - Page 212

IPECS Release 5
Feature Description & Operation 5.0
3-16
A page warning tone, if assigned, will be provided to the Page Zone(s) prior to the audio
connection. The user is allowed to continue the page for the specified Page Time-out timer after
which the user is disconnected and the Page Zone(s) is returned to idle.
The default Page Zone dial codes are as follows:
iPECS-Micro iPECS-100S iPECS 300 iPECS 1200
iPECS-50 iPECS 600
Internal Page Zones 501~510 501~510 501~535 301~400
Internal All Call Page 543 543 543 543
External Page Zones 545 545~546 545~546 545~546
External All Call Page 548 548 548 548
All Call Page 549 549 549 549
iPECS-Micro have same default Page Zone dial codes with iPECS-50 except External Page.
(iPECS-Micro does not have external port.)
Flexible buttons of an iPECS Phone may be assigned to access a Page Zone as a {
PAGE ZONE}
button.
Operation
iPECS Phone
To assign a Flex button as a {
PAGE ZONE} button
[
PGM] + {FLEX} + Page Zone number + [SAVE]
To make a page,
1. Lift the handset.
2. Dial the desired paging code or press a {
PAGE ZONE} button.
3. If assigned, after the Page Warning Tone, make announcement.
4. Replace the handset and go on-hook.
To queue for a page when busy is received.
1. Press the [
MSG/CALLBK] button.
2. Replace the handset returning to idle.
SLT
To make a page,
1. Lift the handset.
2. Dial the desired paging code.
3. If assigned, after the Page Warning Tone, make announcement.
4. Replace the handset, go on-hook.
To queue for a page when busy tone is received.
1. Dial ‘556’, the Call Back code.
2. Replace the handset returning to idle.
Conditions
1. Stations, which are denied access to paging, will receive error tone when any Page Access
code is dialed.