IPECS Release 5
Feature Description & Operation 5.0
2-120
4. Press the {CO}/{IP}, {LOOP}, or {POOL} button or dial the CO/IP line/group access code.
5. Dial the number to be stored.
6. Press the [
SAVE] button.
7. If desired, enter a name, see alphanumeric entry chart under Station Speed Dial.
8. Press the [
SAVE] button.
To dial a Station Speed Dial number with the LIP-8000 series soft buttons
1. Press the [
DIR] soft button
2. Press the [
SPEED] soft button
3. Press the [
ADD] soft button
4. Dial the Speed Dial bin number
IPECS-Micro & 50 & 100: ‘200’-‘999’
iPECS-300: ‘2000’-‘4999’
iPECS-600: ‘2000’-‘7999’
iPECS-1200: ‘20000’-‘31999’.
5. Press the {
CO}/{IP}, {LOOP}, or {POOL} button or dial the CO/IP line/group access code.
6. Dial the number to be stored.
7. Press the [
SAVE] button.
8. If desired, enter a name, see alphanumeric entry chart under Station Speed Dial.
9. Press the [
SAVE] button.
Conditions
1. Accessing an empty Speed Dial bin will return error tone.
2. A Speed Dial number can be assigned to use a CO/IP Line/Group. If the assigned line is busy,
a line from the same group will be selected. If all lines in the group are busy, the user may
queue for the next available line.
3. All Speed Dial numbers are stored in memory protected from power loss.
4. The CO/IP line used for a Speed Dial is presented to a direct appearance on the iPECS Phone.
If there is no direct appearance at the station, a {
POOL} or {LOOP} button is used as the
appearance for the line.
5. The user may pre-select the CO/IP line for a Speed Dial number, overriding the CO/IP line
assignment in the Speed Dial bin.
6. A name can be entered for a Speed Dial number to permit access from the Dial-by-Name
directory.
7. If a Speed Dial number contains a “Dial Tone Detect” command, Flash as the first entry in the
bin, and dial tone detect is enabled for the CO line, the system must detect dial tone before
dialing the Speed Dial number.
Programming
STATION 1. Speed Dial Access (PGM 112-Btn 8)
S
YSTEM 1. CO Dial-Tone Detect (PGM 160-Btn 3)
T
ABLES 1. System Speed Zone (PGM 232)
To Next Page
Loading...
