LG IPECS - Page 81

IPECS Release 5
Feature Description & Operation 5.0
2-66
To use Dial by Name using the LIP-8000 series soft buttons
1. Press the [
DIR] soft button
2. Dial the desired directory, 1: User Speed Dial, 2: System Speed Dial 3: Intercom.
3. Search the directory using the Navigation button or by entering two digits for each character,
see section 2.64.3 for character entry procedure.
4. Press the [
HOLD/SAVE] button to place the call.
To toggle between the name and number display
1. Press the [
TRANS] button.
To program the station user name
1. Press the [
PGM] button.
2. Dial ‘74’, the User Name Program code.
3. Dial the name, up to 12 characters; refer to Station Speed Dial for character entry.
4. Press [
SAVE].
SLT
To program the station user name
1. Lift the handset
2. Dial ‘561’, SLT Programming code.
3. Dial ‘74’, the User Name Program code.
4. Dial the name, up to 12 characters; refer to Station Speed Dial for character entry.
5. Momentarily press the hook-switch, confirmation tone is received.
System Attendant
To program a name for another station
1. Press the [
PGM] button.
2. Dial ‘071’, the Attendant User Name Program code.
3. Dial the station number.
4. Dial the name, up to 12 characters; refer to Station Speed Dial for character entry.
5. Press [
SAVE].
Conditions
1. Available characters are A to Z, space and period.
2. The LCD will display multiple names, one per LCD line up to 16 characters.
3. If a user selects a directory with no entries or there is no match to the user entry, the “No
Entries” message is displayed and error tone is provided.
4. Dial-by-Name is only available to iPECS Phones with a display. Other users will receive error
tone if an attempt is made to access Dial-by-Name.
5. A user may both scroll and enter characters to search a directory.
Programming
STATION 1. System Speed Dial Access (PGM 106-Btn 16)