IPECS Release 5
Feature Description & Operation 5.0
2-41
Operation of Preset Call Forward is automatic.
Conditions
1. A station receiving a forwarded call can transfer the call to the forwarding station.
2. Calls cannot be forwarded to a station in DND and, if attempted, error tone is returned.
3. Manual Forward has higher priority than Preset Forward and overrides any Preset Forward
setting.
4. Calls to a Preset Call Forward chain will progress as appropriate through the chain to the last
station. If a station in manual Call Forward or DND is encountered, it is bypassed and the next
station in the chain is signaled. If the last station has entered DND, CO/IP calls revert to the
previous station, signaling until answered or abandoned.
5. Internal Busy or No Answer will only operate when the internal call encounters a busy state or
no answer, respectively. External Busy or External No Answer will only operate when the
external call encounters a busy state or no answer, respectively.
6. Preset call forward status is not shown in the station’s LCD display.
7. A station in a Station Hunt Group (ACD, Circular or Terminal) can be assigned to receive
incoming hunt calls, overriding any Call Forward. That is, either the system recognizes the
Forward condition and bypass hunt calls around the station or routes hunt calls to the station
based on the system database.
8. No Answer forward employs the Station No Answer Forward Timer unless it is set to zero in
which case the System No Answer Timer is used.
Programming
STATION 1. Preset Call Forward (PGM 120)
2. Station Call Forward No Answer Timer (PGM 123-Btn 1)
3. Direct Transfer Mail Box Destination (PGM 120-Btn 6)
S
TATION GROUPS 1. Member Forward (PGM 191 Btn-14-Circ/Term, 24-23-UCD, or 12-Ring)
S
YSTEM 1. System Call Forward No Answer Timer (PGM 181-Btn 1)
Related Features
Call Forward
Off-Hook Signaling
External Auto Attendant/Voice Mail
VMIM/VSF Integrated Auto Attd/Voice Mail
DND (Do Not Disturb)
DND - One Time DND
Private Line
Hardware
To Next Page
Loading...
