IPECS Release 5
Feature Description & Operation 5.0
2-73
1. Momentarily press the hook-switch.
2. Dial ‘561’, the SLT Programming code
3. Dial ‘23’, the Walking COS code.
4. Dial the station number and Authorization code, ‘*’ and System Authorization code or “*”, the
code index and System Authorization code.
5. Place call as normal.
Conditions
1. The Station COS applied for Walking COS is the COS of the station associated with the
Authorization code or, for a System Authorization code, COS1.
2. Walking COS applies the COS for only one call. Terminating the call returns the station to the
assigned Station COS. The user may reactivate Walking COS to place another call or use
Flash to maintain the Walking COS.
3. Use of Authorization codes varies based on the system nation code. In some regions,
particularly the US and UK, a System Authorization code may be required for DISA access.
Entering a Station code on a DISA line will fail in these areas. In other regions, a System
Authorization code can be used with Walking COS.
Programming
STATION 1. Station COS (PGM 116)
CO/IP 1. CO COS (PGM 141-Btn 2)
S
YSTEM 1. DISA COS (PGM 166)
2. PBX Trunk Access Codes (PGM 172)
4. LD Digit Count (PGM 177-Btn 4)
3. LD Digit Code (PGM 177-Btn 19)
T
ABLES 1. Toll Restriction (PGM 224)
2. Authorization Codes Table (PGM 227)
Related Features
Class of Service
Auto Service Mode Control
Day/Night/Timed/Scenario Ring Mode
Authorization Codes (Password)
Hardware
To Next Page
Loading...
