Lucent Technologies DDM-2000 OC-12 Installation Manual

Issue 5 November 2000 
363-206-208
Equipment and Rear Access Cabling for the DDM-2000 OC-12 Multiplexer
Lucent Technologies - Proprietary
See Notice on first page
Table 2-4 Telemetry and Modem Cable Assemblies
Description
ED-8C727-20 Group
(Note 1)
Cable
Length (ft.)
(Note 2)
Cable
Type
DDM-2000
Backplane
Connections
Modem Interface for Any
Shelf
164 75 812AS J60
189 50
190 150
173 (D.A.) As Reqd.
Order Wire 167 3 812AS J20
ED8C724-22 G31 17
TBOS
3
Direct Connection 157 150 812AS J62
185 300
158 (D.A.) As Reqd.
TBOS
3
Resistor Adapter 159 2’ 6" 812AS J62
GTP to TBOS Interface
Cable
196 250 812AS J62
195 150
180 (D.A.) As Reqd.
TBOS
3
and, Mode MULT. for
Additional OC-12 Shelves
(Shelves 2 and 3)
169 4 807AS J73 to J72 on
Lower Shelf
187 8
170 (D.A.) As Reqd.
Modem Mult, w/o TBOS
3
for
Additional OC-12 Shelves
(Shelves 2 and 3)
171 4 807AS J73 to J72 on
Lower Shelf
188 8
172 (D.A.) As Reqd.
Modem Mult, w/o TBOS
3
for
Additional OC-3 Shelf
ED-8C724-20 G548 20 807AS J73 OC-12 Shelf
to J58 OC-3 Shelf
ED-8C724-20 G391
(D.A.)
4
TBOS
3
, Modem for
Additional OC-3 Shelf
ED-8C724-20
G389
4 807AS J73 OC-12 Shelf
to J58 OC-3 Shelf
Parallel Telemetry
3
for Shelf 1
160 150 807AS J21 (non-adja-
cent shelves)
161 (D.A.) As Reqd.
Parallel Telemetry
3
MULT. for
Additional OC-12 Shelves
162 4 807AS J22 to J21on
Lower Shelf
163 (D.A.) As Reqd.
Parallel Telemetry
3
MULT.for
Additional OC-3 Shelves
ED-8C724-20 G386 4 807AS J22 OC-12 Shelf
to P54 OC-3Shelf

Lucent Technologies DDM-2000 OC-12 Specifications

General

Brand	Lucent Technologies
Model	DDM-2000 OC-12
Category	Multiplexer
Language	English