Lucent Technologies DDM-2000 OC-12 Installation Manual

 Issue 5 November 2000
363-206-208
Introduction
Lucent Technologies - Proprietary
See Notice on first page
Table 1-2 Tools, Test Sets, and Accessories
Description Commercial or Comcode Notes
Multimeter 1
Screwdriver with Appropriate Head(s)
Soldering Iron
Vacuum Cleaner 2
Drill Hammer
Safety Goggles
Level
Anti-Oxidation Material NO-OX-ID
*
"A" Compound
* Registered trademark of Sanchem, Inc.
3
Thomas & Betts
†
Crimping Tool
† Registered trademark of Thomas & Betts corporation.
WT-414
4
Paladin
‡
Coaxial Wire Stripper
‡ Registered trademark of Paladin Corporation.
PA1208
Replacement
Paladin Cassette PA2201
ESD Wrist Strap > 6-1/2" circumference 901011320
ESD Wrist Strap < 6-1/2" circumference 900557075
Optical Fiber Cables (Min. of 2) 5
15 dB Lightguide Buildout Assembly
20 dB Lightguide Buildout Assembly
DSX-3/STSX Patch Cords (Min. of 2)
Optical Power Meter with ST type connector
6
MS-DOS
**
Compatible Personal Computer
** Registered trademark of Microsoft Corporation.
76
EIA-232 Cable (35 Pin)
Microduster Air (Clean) (12 Cans/Case) 406100339
Microduster Nozzle Assembly 406100321
Absorbond Cleaner (300 Wipes/Pkg.) 900709379
963TR 1038A Contact Hand Tool 106077654
PANDUIT
††
Duct Notching Tool
†† Registered trademark of Panduit Corporation.
DNT-100 8

Lucent Technologies DDM-2000 OC-12 Specifications

General

Brand	Lucent Technologies
Model	DDM-2000 OC-12
Category	Multiplexer
Language	English