Lucent Technologies DDM-2000 OC-12 Installation Manual

Issue 5 November 2000 
363-206-208
Stand-Alone (Local) Installation Tests for the DDM-2000 OC-12 Multiplexer
Lucent Technologies - Proprietary
See Notice on first page
Table 6-1 DDM-2000 OC-12 Command Codes
Command Verb First Modifier Second Modifier Abbreviation
Delete Cross-Connection STS1 dlt-crs-sts1
TID Address Map dlt-tadrmap
Enter Cross-Connection STS1 ent-crs-sts1
Upper Layer Section DCC ent-ulsdcc
Help ?
Initialize Performance Monitoring init-pm
System init-sys
Install Program ins-prog
Logout log
Operate Alarm Cutoff opr-aco
Loopback T3 opr-lpbk-t3
Remote Login rlgn
Release Loopback T3 rls-lpbk-t3
Reset reset
Retrieve Alarm (and Status) rtrv-alm
Attribute
Alarm rtrv-attr-alm
Control rtrv-attr-cont
Environment rtrv-attr-env
Cross-Connection STS1 rtrv-crs-sts1
Equipment rtrv-eqpt
Feature rtrv-feat
Far End Communications rtrv-fecom
History rtrv-hsty
Login rtrv-lgn
Link rtrv-link
Network Map rtrv-nmap
(Release 3)
rtrv-map
(Releases 5 and 7)
Network Element rtrv-ne
OC12 rtrv-oc12

Lucent Technologies DDM-2000 OC-12 Specifications

General

Brand	Lucent Technologies
Model	DDM-2000 OC-12
Category	Multiplexer
Language	English