Issue 5 November 2000 [Y
List of Figures
363-206-208
Lucent Technologies - Proprietary
See Notice on first page
About This Document
Figure 1. Static Control Wrist Strap xxviii
Figure 2. Product Support xlv
2 Equipment and Rear Access Cabling for the DDM-2000 OC-12
Multiplexer
Figure 2-1. DDM-2000 OC-12 Backplane 2-48
Figure 2-2. ED-8C500 or 8C800 Frame, Rear Access Cable Placement 2-49
Figure 2-3. ED-8C501 or 8C801 Frame, Rear Access Cable Placement 2-50
Figure 2-4. Connector Pin Outs 2-51
Figure 2-5. DDM-2000 OC-12 Shelf Mounting (Top View) 2-52
Figure 2-6. Bay Mounting Arrangement for DDM-2000 OC-12 Bay 2-53
Figure 2-7. Bay Mounting Arrangement for OC-3/OC-12 Bay 2-54
Figure 2-8. Side Mounting Bracket Positions 2-55
Figure 2-9. Fan Filter Installation 2-56
Figure 2-10. Rear Access DS3 Cabling 2-57
Figure 2-11. Cable Preparation for 219N Connector 2-58
Figure 2-12. Power Cabling 2-59
Figure 2-13. Office Alarm and Parallel Telemetry Cabling 2-60
Figure 2-14. Office Alarm and Parallel Telemetry Mult Cabling for
OC-3/OC-12 Bay 2-61
Figure 2-15. TBOS and Miscellaneous Discrete Telemetry Cabling 2-62
Figure 2-16. TBOS and Miscellaneous Discrete Telemetry Cabling
for OC-3/OC-12 Bay 2-63
Figure 2-17. DS1 Timing, TL1 Interface, Order Wire, and Modem
Cabling 2-64
Figure 2-18. Remote Terminal Miscellaneous Discrete Functions
(Releases prior to 5) 2-65
Figure 2-19. CO Terminal Miscellaneous Discrete Functions
(Releases prior to 5) 2-66
Figure 2-20. Miscellaneous (Environmental) Discrete Functions
(Releases 5) 2-67
To Next Page
Loading...
Need help?
General
