[YL Issue 5 November 2000
List of Figures
363-206-208
Lucent Technologies - Proprietary
See Notice on first page
Figure 2-21. DS1 Timing, TL1 Interface, Order Wire, and Modem
Cabling for OC-3/OC-12 Bay 2-68
Figure 2-22. Single Shelf DS1 Sync Timing, TL1 Interface, Order Wire,
and Modem Cabling 2-69
Figure 2-23. DS1 Sync Timing, TL1 Interface, Order Wire, and
Modem Cabling 2-70
Figure 2-24. DS1 Sync Timing, TL1 Interface, Order Wire, and
Modem Cabling for OC-3/OC-12 Bay 2-71
3 Equipment and Front Access Cable Installation for the
DDM-2000 OC-12 Multiplexer
Figure 3-1. DDM-2000 OC-12 Backplane 3-46
Figure 3-2. ED-8C500 Frame, Front Access Cable Placement 3-47
Figure 3-3. Connector Pin Outs 3-48
Figure 3-4. DDM-2000 OC-12 Shelf Mounting (Top View) 3-49
Figure 3-5. Bay Mounting Arrangement 3-50
Figure 3-6. Bay Mounting Arrangement for DDM-2000 OC-3/OC-12
Combined Bay 3-51
Figure 3-7. Side Mounting Bracket Positions 3-52
Figure 3-8. Front Access DS3 Cabling 3-53
Figure 3-9. Fan Filter Installation 3-54
Figure 3-10. Cable Preparation for 219N Connector 3-55
Figure 3-11. Office Alarm and Parallel Telemetry Cabling 3-56
Figure 3-12. Office Alarm and Parallel Telemetry Mult Cabling for
DDM-2000 OC-3/OC-12 Combined Bay 3-57
Figure 3-13. TBOS and Miscellaneous Discrete Telemetry Cabling 3-58
Figure 3-14. TBOS and Miscellaneous Discrete Telemetry Cabling
for DDM-2000 OC-3/OC-12 Combined Bay 3-59
Figure 3-15. Remote Terminal Miscellaneous Discrete Functions
(Releases prior to 5) 3-60
Figure 3-16. Central Office Terminal Miscellaneous Discrete Functions
(Releases prior to 5) 3-61
Figure 3-17. Miscellaneous (Environmental) Discrete Functions
(Releases 5 and 7) 3-62
Figure 3-18. DS1 Timing, TL1/X.25 Interface, Order Wire, and
Modem Cabling 3-63
Figure 3-19. DS1 Timing, TL1/X.25 Interface, Order Wire, and
Modem Cabling for DDM-2000 OC-3/OC-12 Combined Bay 3-64