Connections Panel
Connections Panel
Beam
Start | Settings | Connections | Beam
Enable or disable receiving OBEX
1
data beams, either by IrDA
2
or Bluetooth.
Note: The MX7 Tecton does not support beaming.
Beam Settings
The default setting for Beam Settings is Disabled as the MX7 Tecton does not support beaming.
1
oBject EXchange - a communications protocol used to exchange information between mobile devices. The device must sup-
port infrared communication.
2
Infrared Data Association. Also used as an abbreviation for the Infrared (IR) port on a mobile device.
E-EQ-MX7WMRG-A [ 155 ] MX7 Tecton™ for Windows Mobile Reference Guide
To Next Page
Loading...
