Software
Introduction - Operating System
There are several different aspects to the setup and configuration of the MX7 Tecton. Many of the setup and configuration
settings are dependent upon the optional features such as hardware and software installed on the mobile device. The examples
found in this section are to be used as examples only, because the configuration of your specific MX7 Tecton may vary. The
following sections provide a general reference for the configuration of the MX7 Tecton and some of its optional features.
Note: LXE recommends frequently charging the MX7 Tecton battery using an external power source to ensure
continuous charging of the internal Super-cap battery.
Windows Mobile
Note: For general use instruction, please refer to commercially available Windows Mobile user’s guides or the Windows
Mobile on-line Help application installed with the MX7 Tecton
This section’s contents assumes the system administrator is familiar with Microsoft Windows options and capabilities loaded
on most standard WindowsXP or later desktop computers.
Therefore, the sections that follow describe only those Windows capabilities that are unique to the MX7 Tecton and its
Windows Mobile environment.
Notes
Based on your installed software version and hardware options, your setup may not be exactly the same as those that are
described in this guide. Contact your LXE representative for information on the latest upgrades for your MX7 Tecton.
E-EQ-MX7WMRG-A [ 24 ] MX7 Tecton™ for Windows Mobile Reference Guide
To Next Page
Loading...
