Update the MX7 Tecton
Update the MX7 Tecton
Contact your LXE representative for the process to follow when your MX7 Tecton needs to be re-imaged.
The MX7 Tecton running Windows Mobile must be returned to the manufacturer, LXE, if the device is to be re-imaged with any
other Windows operating system (for example, Windows CE 6).
Battery State and OS Upgrade
LXE recommends a fully charged main battery be installed in the MX7 Tecton prior to upgrading the operating system. A
prompt may appear when the battery reaches Critical Low that informs the user there is not enough power in the main battery to
perform the update.
The operating system will not be able to execute the OS update when the battery level is too low (25% or less), as there is a
high risk that the power remaining in the battery expires when executing the update and the MX7 Tecton will be left in an
inoperable state.
When main battery power level is too low, connect external power to the MX7 Tecton before performing the OS update
procedure. Do not disconnect external power before the update process is complete.
Contact your LXE representative for the process to follow when your MX7 Tecton needs the OS updated.
The MX7 Tecton running Windows Mobile must be returned to LXE if the device is to be imaged with any other Windows
operating system (for example, Windows CE).
E-EQ-MX7WMRG-A [ 246 ] MX7 Tecton™ for Windows Mobile Reference Guide
To Next Page
Loading...
