Lock
Lock
Start | Settings | Lock
Password
Set the lock / unlock behavior for the MX7 Tecton.
Factory Default Settings
Prompt if device unused for Unchecked
Timer 0 minutes
Password type Simple PIN
Password <blank>
Confirm <blank>
Password Settings – Password Panel
Prompt if phone unused for – Check the checkbox and set the inactivity timeout before the MX7 Tecton locks. When selecting
a Password type the screen displays a numeric keypad or the input panel depending on the type of password selected.
Note: Once a password has been entered, the password must be used to access the Lock panels again.
Select the Password type, Simple PIN (numeric) or strong alphanumeric. Enter the desired password and confirm. Note that
Windows Mobile places restrictions on what it considers a valid password. If the chosen password is not strong enough, a
warning is displayed and a new password should be entered and confirmed.
E-EQ-MX7WMRG-A [ 48 ] MX7 Tecton™ for Windows Mobile Reference Guide
To Next Page
Loading...
