Operating elements for crane operation
9.2 Short description of the operating elements
9 - 104 Operating manual
GMK5150L
Horn
The ignition must be switched on.
Outrigger menu The operating elements for the outriggers are only active when the
Outrigger menu is open.
Outrigger menu
Operating the left outriggers (next to control unit)
Button (5) or (6) is pressed.
Movement stops after the button is released, and when an end position is
reached.
1–Press: Carrier horn on
– Opening: Press button (2) repeatedly until display (1) appears.
1Retract: Press button – outrigger beam retracts
1)
2 Extend: Press button – outrigger beam extends
1)
3Retract: Press button – outrigger cylinder retracts
4 Extend: Press button – outrigger cylinder extends
1)
only on operator's side
Outrigger beams;
à p. 12 - 51
Outrigger cylinders;
à p. 12 - 57
To Next Page
Loading...
