EasyManua.ls Logo

Manitowoc GROVE GMK5150L

Manitowoc GROVE GMK5150L
1040 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Rigging work
12.7 Outriggers – Overview – MAXbase slewing range type
Operating manual 3 302 709 en 12 - 37
GMK5150L
12.01.2018
Right / Left
Right greater than left
The outrigger width is the same at the left and
the same at the right. The table shows the
permissible combinations.
Left greater than right
The outrigger width is the same at the left and
the same at the right. The table shows the
permissible combinations.
There are no separate lifting capacity tables
for this type. The lifting capacities for the
Right
greater than left
type are enabled in a corre-
spondingly mirrored slewing range;
à Lifting
capacities and slewing ranges for outrigger spans
without separate lifting capacity tables
, p. 11 - 28.
s
FR / RR FL / RL
I
3.800 m (12.5 ft) 3.350 m (11.0 ft)
II
3.800 m (12.5 ft) 2.950 m (9.7 ft)
III
3.800 m (12.5 ft) 2.550 m (8.4 ft)
IV
3.350 m (11.0 ft) 2.950 m (9.7 ft)
V
3.350 m (11.0 ft) 2.550 m (8.4 ft)
VI
2.950 m (9.7 ft) 2.550 m (8.4 ft)
FR / RR FL / RL
I
3.350 m (11.0 ft) 3.800 m (12.5 ft)
II
2.950 m (9.7 ft) 3.800 m (12.5 ft)
III
2.550 m (8.4 ft) 3.800 m (12.5 ft)
IV
2.950 m (9.7 ft) 3.350 m (11.0 ft)
V
2.550 m (8.4 ft) 3.350 m (11.0 ft)
VI
2.550 m (8.4 ft) 2.950 m (9.7 ft)

Table of Contents

Related product manuals