MASSO
MASSO Documentation
Scan the QR code to watch the MASSO video tutorial on YouTube
Or, Click here to view the video
Hard Limits
The homing switches double as hard limit switches. To work all hard limit switches must be outside the
envelope of axis travel or the hard limit will trip before it reaches the full travel of your axis. Soft limits should
be used first and Hard limits as a last resort. Tripping a hard limit will not instantly stop the axis but it will
decelerate to a stop. Hard limits can be disabled under general settings.
Hint: if you mount your Homing switch on the moving carriage and put a trigger at each end of the axis travel
the one sensor can be both homing switch and limit switch triggering at each end of the axis travel.
Soft Limits
Minimum and maximum travel
Setting up soft limits is important to prevent your machine from crashing at the extremes of travel.
Set up incorrectly it will restrict machine travel and in extreme cases prevent the machine from moving at all.
Additional resource video
Scan the QR code to watch the MASSO video tutorial on YouTube
Or, Click here to view the video
v5.18 - 08 Apr,2021
www.masso.com.au Page 169 of 477
To Next Page
Loading...
