MASSO
MASSO Documentation
4.6. Plasma
Does MASSO include a built in THC?
There is no built in THC within MASSO however you can connect one.
MASSO uses any THC that outputs UP / Down and Arc OK signals such as the Proma150 or Price
AVHC
Please see our documentation on how THC works.
https://docs.masso.com.au/wiring-and-setup/plasma-torch-height-control/how-thc-works
Does MASSO supply an THC to use with MASSO?
In the future, we will be adding a MASSO THC to the MASSO range, designed specifically to work with the
MASSO CNC controller. At present, there is no scheduled release date.
Can I use Third party THC’s with MASSO?
MASSO uses any THC’s that outputs UP / Down and Arc OK signals such as the Proma150 or Price AVHC,
any system able to provide these signals can be used with MASSO.
https://docs.masso.com.au/wiring-and-setup/plasma-torch-height-control/how-thc-works
How do I turn on the Plasma with MASSO?
Please read our How THC works which details the connection process https://docs.masso.com.au/wiring-and-
setup/plasma-torch-height-control/how-thc-works
What equipment do I need to convert / Build my CNC machine?
To establish your requirements you need to do an inventory of what your machine currently has that you can
reuse and what you would like to add.
Example of basic Plasma requirements
MASSO, Keyboard, Monitor and mouse or a MASSO Touch
USB Flash drive
Power supply for MASSO
Motor drives using step and direction signaling
Power Supply for motor drives
Homing sensors, one for each axis
MASSO relay board used for Turning Plasma on and off, external Estop to motor drives, Tower lights,
etc.
Plasma source
Optional
v5.18 - 08 Apr,2021
www.masso.com.au Page 26 of 477
To Next Page
Loading...
Need help?
General
