MASSO
MASSO Documentation
4.8. Spindles
Will a particular spindle work with MASSO?
MASSO provides a 0~10v, CW and CCW signals to control spindle speed (RPM).
Two open-collector optical switches for forward (clockwise) and reverse (counter-clockwise) signals.
If your VFD conforms to this format then MASSO will work with your spindle.
https://docs.masso.com.au/wiring-and-setup/setup-and-calibration/spindle-vfd-examples
How do I connect my Spindle?
It is not possible to provide wiring diagrams for every VFD or provide advice on how to configure specific
VFD’s. Please consult your VFD manual and VFD supplier for configuration settings.
Our documentation provides examples of some common VFDs and we have produced a step-by-step video
explaining how to connect a VFD to MASSO.
https://docs.masso.com.au/wiring-and-setup/setup-and-calibration/spindle-vfd-examples
v5.18 - 08 Apr,2021
www.masso.com.au Page 29 of 477
To Next Page
Loading...
