MASSO
MASSO Documentation
11.11. Slave Axis
Software axis slaving option can be used to slave
X axis with A axis or Y axis with B axis. This option
allows the user to have two separate homing switches or sensors on axis to be able to align the axis.
INFORMATION: When using slaving option, separate homing sensors/switches need to be
installed on the slave side.
Scan the QR code to watch the MASSO video tutorial on YouTube
Or, Click here to view the video
v5.18 - 08 Apr,2021
www.masso.com.au Page 333 of 477
To Next Page
Loading...
